Coming Soon

Low Profile IEEE802.3 af PoE Module - Now Released

Even we thought it couldn’t be done, but we were wrong! Coming soon from Silvertel, a module that is even lower profile than the Ag9800. With a height of under 8mm, and the same tiny footprint as the Ag9900, the new module is targeted at the next generation of IOT applications and products, requiring low power POE in as small a package as possible.

Full Featured IEEE 802.3at 12W Low Profile Power over Ethernet (PoE)  PD module Ag9900-LP Shortform

Ag6800 (PSE) and Ag5800 (PD) modules
High power 4 pair POE compliant to IEEE802.3bt - Now Released

Many Silvertel customers are aware that the IEEE has been in drafting a new Power over Ethernet standard, 802.3bt for some time. This is a new higher power standard for delivering a maximum power of anywhere between 71W and 100W at the PD (depending on losses and cable lengths), over the full 4 pairs of wires in a CAT5E cable to improve efficiency and minimise losses at the higher power levels. This standard is now at Draft 3.2, to which release level Silvertel are preparing a new set of modules, the Ag6800 and Ag5800. Ag6800 will be a fully (draft) standards compliant 95W maximum output PSE module and will be released first, followed shortly after by the Ag5800 PD module delivering up to 100W of usable power to the end device. Both modules will be cost and footprint size optimised to provide state of the art solutions at market leading prices for our customers for the next generation of POE applications.

Full Featured IEEE 802.3at 12W Power over Ethernet (PoE)  PD module Ag5800 Shortform

Full Featured IEEE 802.3at 12W Power over Ethernet (PoE)  PD module Ag6800 Shortform